Important Safety Information - Greenlee 555 Instruction Manual

Electric bender
Hide thumbs Also See for 555:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INFORMATION

Extension cords:
• Use only three-wire, 12-AWG
extension cords that have three-
prong grounding-type plugs and
three-hole receptacles that accept
the tool's plug.
• Do not use extension cords that
are longer than 30 m (100').
• Repair or replace damaged
extension cords.
Failure to observe these warnings
can result in severe injury or death.
Make sure that the handle is properly installed and
secured with the safety spring clips and snap pins
before lifting or moving the bender. An improperly
installed handle could allow the bender to fall,
injuring nearby personnel.
Failure to observe this warning can result in severe
injury or death.
Pinch points:
Keep hands away from bending
shoe, rollers and conduit when
bender is in use.
Failure to observe this warning can
result in severe injury or death.
Unplug the bender before changing accessories.
Accidental start-up can result in serious injury.
Greenlee Textron / Subsidiary of Textron Inc.
®
555
Deluxe Electric Bender
Do not use as a step or ladder.
• Conduit moves rapidly as it is bent. The path of
the conduit must be clear of obstructions. Be
sure clearance is adequate before starting the
bend.
• Do not operate the bender while wearing loose
clothing. Loose clothing can get caught in moving
parts.
• Inspect the bender before use. Replace worn,
damaged or missing parts with Greenlee replace-
ment parts. A damaged or improperly assembled
component could break and strike nearby
personnel.
• Some bender parts and accessories are heavy
and may require more than one person to lift and
assemble.
• Use only accessories and attachments recom-
mended by Greenlee.
• Do not stand on the bender; the bender may tip
over.
• Do not leave the tool running unattended. Do not
leave the tool until it comes to a complete stop.
Turn the power off and unplug the tool after use.
• Ensure that all bystanders are away from the
work area when operating the bender.
• Ensure that the work area is clean, dry,
uncluttered, and well-lit.
• Use this tool for the manufacturer's intended
purpose only. Use other than that which is
instructed in this manual can result in injury or
property damage.
Failure to observe these precautions can result in
injury or property damage.
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

555 deluxe

Table of Contents