Important Safety Information - Greenlee 881-MBT Instruction Manual

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
Greenlee / A Textron Company
SAFETY
ALERT
SYMBOL
881-MBT Mobile Bending Table
Pinch points:
Keep hands away from moving parts.
Failure to observe this warning could
result in severe injury or death.
• Do not use as a step or ladder.
• Use only on a hard, flat, level
surface.
Failure to observe these warnings
could result in severe injury or death.
• Keep bystanders a safe distance from the work
area.
• Follow recommended service procedures.
• Use only original equipment or Greenlee specified
replacement parts and accessories.
• Use this unit for the manufacturer's intended
purpose only, as described in this manual.
Failure to observe these warnings could result in
severe injury or death.
Note: Keep all decals clean and legible, and replace
when necessary.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070