Reset To Factory Defaults - Yamaha Revolabs FLX2 System Manual

Device LED Indicator
Green
Alternating slow Red - Green flash
Steady Red
Groups of five rapid Red flashes
Device LED Indicator
Long solid on, then a long solid off
Double flashes every second
Skip every fifth double flash
Continuous Fast Flashing
Off
* In some Speakers the LED Indicator color Yellow might look like Red.

Reset to Factory Defaults

See page 41 for a description on how to reset the FLX2 Conference Phone back to its
factory defaults.
Status
The speaker will try to re-establish the link
for about 10 minutes, then power off.
Speaker is not paired to a Base Station
The speaker will power down after two minutes.
o Speaker is being powered down
o Speaker is in pairing mode.
Speaker is in a fault condition.
Status
Base Station
Power On Boot Process
Operating Mode indicating that Base Station is
functional.
Fault indication. This also indicates past faults that
have no bearings on current operation
Updating non-volatile memory as part of software
update
No Power
59