Charging Components During A Call - Yamaha Revolabs FLX2 System Manual

4. After the second call has been established, merge
the two calls by pressing the green 'Call' button
again.
Call Waiting
1. While a call is active and the FLX2 System receives
a second call, the Speaker or Dialer will play the call
waiting indication tone.
2. If available, the FLX Dialer displays the incoming
caller number and name.
3. The FLX Dialer presents the user with the option to
'Answer' the call.
4. If no action is taken and the second call aborts, the
FLX Dialer will show the previous Active call screen
again.
5. When answering the second call, the first call is put
on hold. Use the green 'Call' button to resume the
first call, ending the second.
NOTE: When using the red 'End Call' button while another caller is on hold, that caller will
remain on-hold in the telephone network. The FLX2 Conference Phone will not be able to
retrieve that call.

Charging Components during a Call

Each system component will respond differently when placed in or out of the charger
during an active telephone call. The following is a description of what can be expected.
Dialer
When the Dialer is placed into the Charger Base during a call in 'speaker mode', the call
will not be affected and the Dialer will enter its charging mode.
When the Dialer is placed into the Charger Base during a 'handset mode' call, the call
will end and the Dialer will enter its charging mode.
When the Dialer is removed from the Charger Base no change to call activity will take
place. If there is no active call, the Dialer will revert to the home screen.
Speaker
When the Speaker is placed into the charger during a call the Speaker will reboot and
enter its charging mode. During the reboot the incoming audio from the conference call
will mute until the reboot is complete (approximately 6 seconds). Once the reboot is
complete the audio will resume on the speaker.
When the Speaker is removed from the charger no change to call activity will take
place.
Microphones
When a Microphone is placed into the charger during a call it will automatically reboot,
switch off and enter its charging mode. If all Microphones are placed into the charger
25