Yamaha Revolabs FLX2 System Manual page 50

Dialer On/Off
To power off the FLX Dialer, hold down the red 'end call' soft key until the device asks
whether you want to shut it down. Confirm this by pressing 'Yes'.
To turn the Dialer back on, either:
1. Hold down the red 'end call' soft key until the Dialer powers on.
OR
2. Simply return the Dialer to an active Charger Base and it will power on
automatically.
Speaker On/Off
To power off the FLX Speaker, hold down the button located on the bottom of the
Speaker until the LED indicators on the top of the Speaker turn solid red. Once the LED
indicators are solid red, release the button and the Speaker will power off.
To power the Speaker back on, either:
1. Hold down the button on the bottom of the Speaker until the LED indicators on
the top of the Speaker turn green. Once the LED indicators turn green, release
the button and the Speaker will power on and connect to the system.
OR
2. Simply return the Speaker to an active Charger Base and it will power on
automatically.
Microphones On/Off
To power off a FLX Microphone, hold down the button located on the Microphone until
the LED indicator turns solid red. Once the LED indicator is solid red, release the button
and the Microphone will power off.
To power a Microphone back on, either:
1. Hold down the button on the Microphone until the LED indicator on the
Microphone turns green. Once the LED indicator turns green, release the button
and the Microphone will power on and connect to the system.
OR
2. Simply return the Microphone to an active Charger and take it out again. It will
power on automatically.
50