Returning To Factory Default Settings (Factory Reset); Initializing By Using The Device; Initializing By Using Yamaha Cs Manager - Yamaha CS-800 User Manual

Returning to factory default settings (factory reset)

This device can be returned to its factory default (initial settings) using either of the following methods.

• Initializing by using the device

• Initializing by using Yamaha CS Manager

NOTE
The log information will be erased when the device is returned to its factory default settings (factory reset).
We recommend downloading the log information before performing a factory reset due to a problem. (Page 51)
 Initializing by using the device
1.
Start the device by connecting the power cable while holding down the [FUNCTION] button
on the rear panel of the device.
Device (rear panel)
Connecting the power cable automatically turns on the device.
2.
After connecting the power cable, keep the [FUNCTION] button pressed for at least 5
seconds.
The status indicator on the front panel of the device flashes in orange five times at a 0.5-second interval.
Initialization is finished when the status indicator lights up in white.
 Initializing by using Yamaha CS Manager
Initialize from the [Configuration] screen in the [Tools] menu of Yamaha CS Manager. (Page 50)
CS-800 User Guide
54
Appendix