Placing A Telephone Call - Yamaha Revolabs FLX2 System Manual

From the home screen a call can be started by dialing a number,
The Home screen also provides information on new voice mails for the extension (if
available), and on missed or rejected calls.

Placing a Telephone Call

1. From the home screen on the FLX Dialer enter the
phone number to be called.
2. Once the number is entered completely, press the
green 'call' button to initiate the phone call.
3. If any Microphones are out of the Charger Base and
active, the call will default to 'speaker mode' and
will be identified by the ring tone being played out of
the Speaker.
4. If no Microphones are outside the Charger Base the
call will default to 'handset mode' and the call will
take place on the FLX Dialer.
Once a call has been started, the home screen will show
that a call is active, the time spent on the call so far, and
the number that was dialed.
21