Grandstream Networks HT-486 User Manual page 6

HandyTone-486 User Manual
Following are the steps to install a HandyTone-486:
1. Connect a standard touch-tone analog telephone (or fax machine) to PHONE port.
2. Connect a PSTN telephone line to LINE port (optional).
3. Insert the Ethernet cable into the WAN port of HandyTone-486 and connect the other end of
the Ethernet cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of HandyTone-486.
5. Insert the power adapter into the HandyTone-486 and connect it to a wall outlet.
Please follow the instructions in section 6.2.1 to configure the HandyTone-486.
6
Grandstream Networks, Inc.