Table of Contents
Advertisement
To select a setting box
Click on the box you want to select or move to by using your keyboard's
Tab or arrow keys. The currently selected setting box is highlighted on
the screen.
To change a setting
After you select a setting box, click on the box or press Enter to pull down
a list of available settings.
Select the setting you want to use in the list by double-clicking on it, or by
moving to it with the arrow keys and pressing Enter.
Note:
An asterisk to the right of a setting indicates that it is the default.
The settings in the General, Font, and Paper windows are identical to those in
the EDS Mode. See "EDS Mode Settings" on page 31 for details.
Adjusting the dot alignment
Click on Adjust or press the F7 function key.
Multi-Part Mode
Normal Mode
Normal-Density
0
CRT Graphics Mode I
0
DRAFT Graphics
0
Double-Density
0
CRT Graphics Mode II
0
Use the above window to test and adjust the vertical alignment of the
printer in each printing mode. See "Adjusting the dot alignment" on
page 72 for full details on dot alignment.
*
*
*
*
*
*
F9:Test
Adjusting the dot alignment
Adjust
Triple-Density
0
*
Quadruple-Density
0
*
LQ Graphics
0
*
DRAFT Text
0
*
LQ-Text
0
*
F10:Test All
43
Advertisement
Table of Contents
