Initialize Screen - Panasonic AW-UE100WP Operating Instructions Manual

Camera menu items (continued)

Initialize screen

I n i t i ali ze
A l l
S c e n e A l l
S c e n e 1
S c e n e 2
S c e n e 3
S c e n e 4
R e t u r n
All
All the set values of OSD menu except for the following items are
restored to the factory settings.
Uninitialized items
• [Frequency] on the [System 1/2] screen
• [Format] on the [System 1/2] screen
• [Format] of [12G SDI] and [3G SDI] on the [Output 1/5] screen
• [Format] of [HDMI] on the [Output 2/5] screen
<NOTE>
• The network settings are not initialized.
• The [AWB] and [ABB] adjustment values are not initialized.
• The information registered in the preset memories is not initialized.
Scene All
From the set values of OSD menu, the set values of all data (Scene1
to 4) saved as a scene file are restored to the factory settings.
The data saved as a scene file includes each of the values set on the
screen enclosed within " " on the OSD menu screen title.
*
(The data not saved as a scene file includes each of the values set on
the screen enclosed within "#" on the OSD menu screen title.)
Scene1
Scene2
Scene3
Scene4
From the set values of OSD menu, the set values of the specified
scene number (any one from Scene1 to 4) in the data saved as a
scene file are restored to the factory settings
Return
Return to the previous menu level.
Concerning initialization
„ „
When any one of [All/Scene All/Scene1/Scene2/Scene3/Scene4] is
selected on the [Initialize] screen, the Initialize confirmation screen is
displayed.
Initialize confirmation screen
I n i t i a l i z e
D o y o u w a n t t o i n i t i a l i z e ?
( A l l )
C A N C E L
O . K .
• When the cursor is moved to [O.K.] on the Initialize confirmation
screen and the setting is entered, the Initialize completed screen is
displayed for 5 seconds, and the camera settings are restored to the
settings which were established when the camera was purchased.
Initialize completed screen
I n i t i a l i z e d ( A l l )
• When the cursor is moved to [CANCEL] on the Initialize confirmation
screen and the setting is entered, the Initialize cancel screen is
displayed for 5 seconds, the initialization operation is not performed,
and the [Initialize] screen returns to the display.
Initialize cancel screen
U n c h a n g e d
83