Picture 6/6 Screen; Matrix 1/5 Screen - Panasonic AW-UE100WP Operating Instructions Manual

Camera menu items (continued)

Picture 6/6 screen

P i c t ure 6/6
K n e e M o d e
A u t o K n ee Resp onse
K n e e P o int
K n e e S l ope
W h i t e C l ip
W h i t e C lip Lev el
D N R
R e t u r n
Knee Mode [Off, Auto, Manual]
Set the operating mode for gradation compression (knee).
Off Turn the knee function off.
Auto Enable the knee function, and set the knee point and knee
slope automatically.
Manual Enable the knee function, and set the knee point and knee
slope manually.
Auto Knee Response [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
Knee Point [70.0% to 107.0%]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [Knee Mode] is set to [Manual].
Knee Slope [0 to 99]
Set the knee slope.
This is only enabled when [Knee Mode] is set to [Manual].
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
White Clip [Off, On]
Turn the white clip function off/on.
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [White Clip] is set to [On].
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
DNR [Off, Low, High]
Set the digital noise reduction level for outputting bright, clear images
without noise, even at night and low-light conditions.
When [Low] or [High] is selected, noise can be eliminated.
However, image lag may increase.
Return
Return to the previous menu level.

Matrix 1/5 screen

Auto
4
93.0%
99
On
109%
Low
Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
Normal
EBU
NTSC
User
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Return
Return to the previous menu level.
56
M a t r i x 1 / 5
M a t r i x T y p e
A d a p t i v e M a t r i x
R e t u r n
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
On the [Matrix 2/5] screen, the [Linear Matrix] value can be
adjusted by the user.
On the [Matrix 3/5] screen, [Matrix 4/5] screen or [Matrix
5/5] screen, the [Color Correction] value can be adjusted
by the user.
N o r m a l
O f f