System 1/2 Screen - Panasonic AW-UE100WP Operating Instructions Manual

Camera menu items (continued)

System 1/2 screen

S y s t e m 1 /2
F r e q u e n c y
F o r m a t
U H D C r o p
C r o p Z o o m
S h o o t i n g Mo de
G e n l o c k
H o r i z o n tal Pha se
R e t u r n
Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]
This item is selected to switch the frame frequency.
• For details on how to change the frequency, refer to "Changing the
frequency" (→ page 63).
Format
For [59.94Hz]
2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,
1080/29.97PsF, 1080/23.98p(59.94i)
For [50Hz]
2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,
720/50p
For [24Hz]
2160/24p, 1080/24p
For [23.98Hz]
2160/23.98p, 1080/23.98p, 1080/23.98PsF
*
1
It denotes "1080/23.98p over 59.94i".
<NOTE>
• Streaming stops when changing the system format.
• For details on how to change the format, refer to "Changing the
format" (→ page 63).
5 9.94Hz
2160/ 59.94p
Off
Off
Normal
0
, 720/59.94p
1
*
UHD Crop [Off, Crop(1080), Crop(720)]
Sets the Crop function which crops UHD(3840×2160) images.
Off Disable the Crop function.
Crop(1080) Crops the designated area from UHD(3840×2160)
images and outputs 1920×1080 images.
The images are cropped to the following sizes.
• When [Crop Zoom] is [Off]
Crops with 1920×1080 angle of view to output
1920×1080 size.
• When [Crop Zoom] is [On]
Crops area according to the value specified in [Crop
Zoom Ratio] on [UHD Crop 2/2] screen and outputs the
cropped image in 1920×1080 size.
(→ page 72)
This is enabled when [Format] is the following.
2160/59.94p, 2160/29.97p
2160/50p, 2160/25p
2160/24p, 2160/23.98p
Crop(720) Crops the designated area from UHD(3840×2160)
images and outputs 1280×720 images.
The images are cropped to the following sizes.
• When [Crop Zoom] is [Off]
Crops with 1280×720 angle of view to output 1280×720
size.
• When [Crop Zoom] is [On]
Crops area according to the value specified in [Crop
Zoom Ratio] on [UHD Crop 2/2] screen and outputs the
cropped image in 1280×720 size.
(→ page 72)
This is enabled when [Format] is the following.
2160/59.94p, 2160/50p
<NOTE>
• When [UHD Crop] is changed, IP video transmission is temporarily
stopped.
• When [UHD Crop] is changed from [Off] to [Crop(1080)], the
[Format] of [Output] for each of the 12G SDI OUT, 3G SDI OUT and
HDMI connectors changes to FHD (1920×1080).
• When [UHD Crop] is changed from [Off] to [Crop(720)], the [Format]
of [Output] for each of the 12G SDI OUT, 3G SDI OUT and HDMI
connectors changes to FHD (1280×720).
• When [UHD Crop] changes from [Crop(1080)] or [Crop(720)] to
[Off], the [Format] of [Output] for each of the 12G SDI OUT and
HDMI connectors does not change back to UHD (3840×2160).
• When [UHD Crop] is [Crop(1080)] or [Crop(720)], the following
values cannot be set in [Streaming mode].
H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD), SRT(H.264
UHD), SRT(H.265 UHD)
(→ page 139)
• When H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD),
SRT(H.264 UHD) or SRT(H.265 UHD) is selected in [Streaming
mode] and [UHD Crop] is switched to [Crop(1080)] or [Crop(720)],
the [Streaming mode] setting changes to [H.264].
• When [UHD Crop] is [Crop(1080)] or [Crop(720)], [Zoom Mode] is
disabled and functions as [Opt.Zoom].
60