Configuring Voice Mail Key Using The Phone Interface; Leaving A Voice Mail; Listening To Voice Mails; Viewing Voicemail Using The Phone Interface - Xorcom UC926 User Manual

UC926 IP Phone

Configuring Voice Mail Key using the phone interface

1. Press Menu →Features →Function Keys →Line Keys as Function Keys→ Line Key2 (for
example).
2. Select the targeted Line key.
3. Press Left arrow or Right arrow key to select the Voice mail in the Type field.
4. Enter the Value.
5. Press Left arrow or Right arrow key to select the Account ID.
6. Press OK or Save soft key to save the configuration

Leaving a Voice Mail:

You can leave a voice mail when the receiver is busy or its inconvenient for them to answer the call.
Follow the voice prompt from the system server to leave a voice mail, and then hang up.

Listening to Voice Mails

When the phone interface receives a new voice mail's icon, the power indicator LED flashes red
(Setting->Preference: Enable Voice Message Status).
1. Pressing
2. Follow the voice prompt to listen to voice mail.

Viewing Voicemail using the phone interface

1. Press Menu->Messages->Voice Mail->View Voice Mail.
2. The LCD screen displays the number of new and old voice mails
Copyright © 2019 Xorcom Ltd.
or the targeted Line key to dial the voice mail access code.
All rights reserved Page 144 of 195