Paging; Call Forward Override (Dss Override); Night Transfer Button - Toshiba Strata DKT3010F-S User Manual

DSS Console

Paging

You can make an announcement page to a group of telephone speakers selected in system
programming with
console or the DADM can be used for page announcements. See

Call Forward Override (DSS Override)

Either the DSS buttons on your DSS console or the associated telephone can be set in system
programming to ring stations that are in the Call Forward mode, instead of being forwarded. Usually
the console's telephone is the unit activated to perform this function. Among other applications, this
feature can be used to notify a person who forgets to deactivate the Call Forward feature after
returning to the office.
To override call forward with the console's associated telephone
Cnf/Trn
1. Press
2. Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your station has a typical
program setting.
To override call forward with your DSS Console
Press the station DSS button set for Call Forward.

Night Transfer Button

This button enables a pre-programmed station to place the system into Day, Day2 or Night Mode. See
your System Administrator for information on the settings for Day, Day2 or Night Mode. Usually,
these modes will transfer calls to a designated location or voice mailbox, depending on programming.
Night Transfer
1. Press
2. Press the desired Mode number:
1
Press
2
Press
3
Press
84
All Call Page
on the DSS console.
or extension button.
.
for Day Mode (LED remains off).
for Day2 Mode (LED flashes red).
for Night Mode (LED is solid red).
SD
(if programmed) on either the DSS
"All Call Page" on page
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
DADM/DSS Console
48.