User Programming Mode; Flexible Button Codes - Toshiba Strata DKT3010F-S User Manual

Flexible Button Codes

Call Forward – Users can set the Call Forward (CF) destination and CF-No Answer Timer
for the CF buttons.
One Touch – Users can set speed dial and custom feature access code sequences for
One Touch buttons.
Background Music – Users can select Quiet Tone or the music source (up to 15) that will
play on their telephone's speaker when they activate the
Directory number and external line buttons cannot be added or deleted, but their ring tones
Note
can be individually changed.
In addition to the Programming Mode, an advanced programming function enables your CTX System
Administrator to individually turn On/Off the telephone's beep tone, handset call waiting tone, and
microphone background noise cancellation option. This mode enables LCD contrast adjustment and
testing the DKT3014 LCD screen.

User Programming Mode

To enter User Programming Mode, press the
#9876
...or dial
To exit User Program Mode, press
... or go off- and on-hook press
A DKT equipped with a headset adapter ignores the hookswitch. It can only exit User
Note
Programming by timing out (approximately 15 seconds).
Flexible Button Codes
Flexible buttons are the unassigned buttons on your keystrip that can be used to store features. The
number of available Flexible Buttons depends on your telephone model and how the buttons are
preassigned by the CTX System Administrator. See
The following steps enable you to program features onto Flexible Buttons for one-touch feature
access.
68
. "USER PROG MODE" appears on your LCD. The Program LED is steady green.
#9876
Program
button
Program
.
pages 3 and
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
User Programming
BGM
button.
6 for the Flexible Button locations.