Iiyama TF1934MC-B5X User Manual page 19

Adjustment Item
OSD H-POSITION
OSD V-POSITION
OSD TIMEOUT
RESET
INPUT SELECT
NOTE However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is fi xed, not selected automatically when VGA,HDMI and DisplayPort which
are selected.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
 INPUT SELECT: Pressing and holding of the SELECT Button for about 5 seconds when the
Menu is not displayed. When VGA, HDMI and DisplayPort signal inputs are
connected to a signal source, you can switch between them by successively
pressing the SELECT Button.
OSD H-POSITION
OSD V-POSITION
O SD TIME O U T
R E SE T
IN P U T SE LE C T
Problem / Option
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Factory-preset data is restored.
AUTO
VGA
Direct
HDMI
DisplayPort
Search for an available input source and select
automatically.
Select the analog input.
Select the digital(HDMI) input.
Select the digital(DisplayPort) input.
Button to Press
OPERATING THE MONITOR 15