USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for...
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No. : PL3222 We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there.
TABLE OF CONTENTS FOR YOUR SAFETY ................1 SAFETY PRECAUTIONS..............1 SPECIAL NOTES ON LCD MONITORS .........3 CUSTOMER SERVICE ..............3 CLEANING ..................3 BEFORE YOU OPERATE THE MONITOR ..........4 FEATURES..................4 CHECKING THE CONTENTS OF THE PACKAGE ......4 CONTROLS AND CONNECTORS..........5 SPECIAL NOTES ON TOUCH PANEL..........6 INSTALLATION ................6 CONNECTING YOUR MONITOR ...........7 COMPUTER SETTING ..............8...
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fi re, electric shock or damage.
Page 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
If you drop any materials or liquids such as water into the monitor when cleaning, WARNING unplug the power cable immediately and contact your dealer or iiyama service center. To protect the Touch screen surface, do not scratch or rub the screen with a hard NOTE object.
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama offi ce.
CONTROLS AND CONNECTORS DVI-D IN VGA IN RJ45 Remote Control OSD Key* <Front> <Back> Menu Button ( Up / Left ( Down / Right Button ( Return / Exit / Input Button ( Power Switch ( Power Indicator Green light: Normal operation NOTE Green fl...
SPECIAL NOTES ON TOUCH PANEL Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch. This could invalidate any remaining warranty. We recommend to use a plastic stylus (tip R0.8 or over) or fi nger. INSTALLATION CAUTION ...
* DVI cable is not supplied with the monitor; you need to use a special DVI cable dedicated for this model. Please contact the iiyama Support Centre in your country if you wish to connect the monitor via the DVI input.
Change to the desired signal timing listed on page 23: COMPLIANT TIMING. Windows Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 23. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
Page 14
Direct LOCK MODE: Pressing and holding of the Button for 3 - 5 seconds when the Menu is not displayed. * The OSD menu is not displayed when the OSD is locked. Pressing and holding of the Button for 3 - 5 seconds again when the Menu is not displayed. The following OSD menu is displayed.
ADJUSTMENT MENU CONTENTS PICTURE PICTURE Backlight Brightness Contrast Sharpness Adjustment Item Problem / Option Button to Press Too dark Backlight Too bright Too dark Brightness * Too bright Too dull Contrast Too intense 0 1 2 3 4 Sharpness You can change the picture quality from 0 to 4 (soft to sharp). Press the Button to change the picture quality in numerical order.
DISPLAY DISPLAY Auto Adjustment H Position V Position Pixel Clock Phase Adjustment Item Problem / Option Button to Press Adjust H/V Position, Pixel Clock and Phase automatically. Auto Adjustment * Too left H Position Too right Too low V Position Too high Too narrow Pixel Clock *...
Page 17
Image Retention is turned off. Rotate OSD counterclockwise 90 degrees. OSD Rotation OSD Rotation is turned off. iiyama Logo displayed when the monitor is turned on. Opening logo iiyama Logo does not display when the monitor is turned on. OPERATING THE MONITOR 13...
Page 18
INPUT INPUT Auto Adjustment Item Problem / Option Button to Press Auto Select the signal input automatically. Select the analog input. Input Direct Select the digital(DVI) input. When only one of the three signal inputs is connected to the signal source, the one NOTE connected is automatically selected.
Page 19
OTHER OTHER Reset OSD Time OSD H Position OSD V Position English Language Adjustment Item Problem / Option Button to Press Reset Factory-preset data is restored. You can set the OSD display duration time OSD Time between 5 and 60 seconds. OSD is too left OSD H Position OSD is too right...
If the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama. com).
Page 21
Press the Button. (Auto Adjustmnet) Adjust the image manually by following procedure below when the screen has a fl icker or blur, or the picture does not fi t in the display area after performing the Auto Adjust. Adjust the V Position so that the top and bottom of the picture frame will fi t to the display area.
Page 22
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern. In case the strong fl icker or blurs remain on a part of the screen, repeat steps NOTE because the Pixel Clock may not be adjusted correctly. If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
Page 24
MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem...
RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling. RECYCLING INFORMATION 21...
APPENDIX Design and specifi cations are subject to change without prior notice. SPECIFICATIONS Technology Projected capacitive 10pt touch Touch Screen Light transmission 85% Communication USB serial transfer system Size Category 32" Driving system a-Si TFT Active Matrix Panel Size Diagonal: 31.5" (80cm) Pixel pitch 0.364mm H ×...