Clearance Requirements - EdgeStar BWC121SSLT Owner's Manual

Clearance Requirements

Notes:
• Choose a location that has ambient temperatures above 50° F and below 90° F. Operation
outside these temperatures may result in lowered efficiency or cause other adverse effects.
• This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water
!
spray or drips.
• The beverage refrigerator should not be located next to ovens, grills, or other heat sources.
• Do not kink or pinch the power supply cord between the beverage refrigerator and the
wall or cabinet.
When installing the beverage refrigerator under a counter, follow the recommended spacing dimensions
shown.
To ensure proper ventilation, allow at least 5" of clearance at the back, 3" at the top, and 3" at the sides.
Top View:
• The beverage refrigerator should be installed on a firm and level surface that will be able to support
the entire weight of a fully loaded unit. It is important for the beverage refrigerator to be level in order to
work properly. If needed, you can adjust the height of the beverage refrigerator by rotating the feet. See
the "Leveling the beverage refrigerator" section.
• A standard electrical supply (115V AC only, 60 Hz), properly grounded in accordance with National
Electrical Code and local codes and ordinances, is required.
8