8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX
Table 5. Troubleshooting chart (Continued)
Symptom
A segment or device is not
recognized as part of the
network.
One or more port LEDs are
blinking continuously and the
network is disabled.
Diagnostics and
Troubleshooting
Possible Cause
One or more devices are not
properly connected, or cabling
does not meet Ethernet guidelines.
A network loop (redundant path)
was created.
76
Possible Solution
Verify that the cabling is correct.
Make sure that all connectors are securely
positioned in the required ports. It is possible
that equipment was accidentally
disconnected.
Break the loop by making sure that only one
path exists from any networked device to any
other networked device.
User Manual