Handset Functions; Setting The Password; Key Lock; Silent Mode - Panasonic KX-UDT121 Operating Instructions Manual

Before Operating the Telephone

Handset Functions

Setting the Password

The handset password is not set by default. You must
register a handset password (4 digits) before use. You
cannot use the following features without setting a
password:
–
Phonebook lock (See "Locking the Handset
Phonebook (Page 38)".)
–
"Manual&Password" or "Auto&Password" for
Key Lock Type (See "Key Option (Page 48)".)
–
Reset Handset (See "Other Option (Page 51)".)
To set
1.
Press or the [CENTER] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Other Option", and
then press .
4.
Press [ ] or [ ] to select "Change Password",
and then press
5.
Enter a new password (4 digits [0–9]).
6.
Verify the password by entering it again as in step
5.
Note
•
To avoid unauthorized access to this product:
–
Set a password that is random and cannot
be easily guessed.
–
Change the password regularly.
•
Make a note of the password so that you will not
forget it.

Key Lock

You can lock all keys other than the Navigator Key while
the handset is in standby mode. One of 4 key lock types
can be selected. For details, see "Key Option
(Page 48)".
To lock
Press and hold or the [CENTER] navigation key
for more than 2 seconds to lock the handset keys.
The icon will be displayed to indicate that the
keys are locked.
16 Operating Instructions
.
.
To unlock
To unlock the handset keys, press and hold
the [CENTER] navigation key for more than 2 seconds.
The icon will change to
have been unlocked.
Note
•
If you select "Manual&Password" or
"Auto&Password" for Key lock type, you need
to enter the password to unlock the handset.
•
If no password has been set, you cannot select
"Manual&Password" or "Auto&Password"
for Key lock type. To set the password, see
"Setting the Password (Page 16)".

Silent Mode

Silent Mode turns off the ringer and sets the handset to
vibrate when calls are received. This can be useful in
situations where you do not want to be disturbed, such
as during a meeting.
When Silent Mode is active, the following features are
turned off or set as specified automatically, regardless
of their settings.
–
Ringer Volume
–
Ring On Charger
–
Auto Answer
–
Key Tone
–
Vibrate (Vib.& Ring)
To set or cancel
To set or cancel Silent Mode, press and hold
more than 2 seconds.
Note
•
If you set the handset on the charger during
Silent Mode, the handset will not vibrate.
•
When Silent Mode is set, the Low Battery Alarm
will not be heard in standby mode.
•
When Silent Mode is set, confirmation sounds
for setting the ring pattern or ring volume will not
play.
*1 Please note that if you set the handset on the charger while
receiving an incoming call, vibration will stop. Once the vibration
stops, the handset will not vibrate again for that call, even if the
handset is lifted up again. (If Quick Answer is set, lifting up the
handset will answer the call.)
or
to indicate the keys
for
*1
Document Version 2013-03