To Remove The Accessories From The Backup Heater; About The Units And Options; Overview: About The Units And Options; Identification - Daikin Altherma EDLQ011-016CW1 Installer's Reference Manual

4 About the units and options

2
3.5.2 To remove the accessories from the
backup heater
1 Remove the wall bracket from the box.
4 About the units and options
4.1 Overview: About the units and
options
This chapter contains information about:
▪ Identifying the outdoor unit
▪ Identifying the control box (if applicable)
▪ Identifying the option box (if applicable)
▪ Identifying the backup heater (if applicable)
▪ Combining the outdoor unit with options
▪ Combining the control box with options
▪ Combining the option box with options
▪ Possible combinations of outdoor unit and domestic hot water tank
4.2

Identification

NOTICE
When installing or servicing several units at the same time,
make sure NOT to switch the service panels between
different models.
Installer reference guide
10
4.2.1

Identification label: Outdoor unit

Location
Model identification
Example: E B/D L Q 14 CA V3
Code
E Monobloc outdoor heat pump
B B=Reversible (heating+cooling)
D D=Heating only
L Low water temperature – ambient zone: −10~
−25°C
Q Refrigerant R410A
14 Capacity class
CA Model series
V3 Power supply: 1~, 220~240 V, 50 Hz
W1 Power supply: 3N~, 380~415 V, 50 Hz
4.2.2

Identification label: Control box

Location
Model identification
Example: EK CB 07 CA V3
Code
EK European kit
CB Control box
07 Capacity class
CA Model series
V3 Power supply
4.2.3

Identification label: Option box

Location
Model identification
Example: EK 2 CB 07 CA V3
Code
EK European kit
2 Optional
CB Control box
07 Capacity class
CA Model series
EBLQ+EDLQ011~016CAV3+W1 + EK(2)CB07CAV3 +
Daikin Altherma low temperature monobloc
Explanation
Description
Description
EKMBUHCA3V3+9W1
4P522034-1 – 2018.01