Table of Contents
Advertisement
Click the Next button to go to the next page, or click the Previous button
return to the previous page.
Select System Tools->Statistics from the menu; you can view the
S
TATISTICS
statistics of the Router, including total traffic and current traffic of the last
Packets Statistic Interval.
Figure 108: Statistics
Current Statistics Status - Enable or Disable. The default value is
◆
disabled. To enable, click the Enable button.
◆
Packets Statistics Interval (5-60) - The default value is 10. Select a
value between 5 and 60 seconds in the pull-down list. The Packets
Statistic interval indicates the time section of the packets statistic.
Select the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.
◆
Sorted Rules - Select a rule from the pull-down list to display the
corresponding statistics..
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Statistics Table:
IP/MAC Address - The IP/MAC Address displayed with statistics
Total Packets - The total amount of packets received and transmitted by
the Router.
Total Bytes - The total amount of bytes received and transmitted by the
Router.
C
HAPTER
– 115 –
| Configuring the Router
4
System Tools
Advertisement
Table of Contents
