Quick Setup; Wps; Figure 16: Wps (Wi-Fi Protected Setup) - SMC Networks BARRICADE N SMCWBR14-N5 User Manual

Q S
UICK ETUP

WPS

Refer to "Quick Installation Guide" on page
This section shows how to quickly add a new wireless device to an existing
network using WPS (Wi-Fi Protected Setup).
Select WPS from the menu. You will see the next screen, as shown in
1.
Figure 16.

Figure 16: WPS (Wi-Fi Protected Setup)

WPS Status - Enable or disable the WPS function here.
■
Current PIN - The current value of the Router's PIN is displayed
■
here. The default PIN of the Router can be found in the label or User
Guide.
Restore PIN - Restore the PIN of the Router to its default.
■
Gen New PIN - Click this button, and then you can get a new
■
random value for the Router's PIN. You can ensure the network
security by generating a new PIN.
Add device - You can add a new device to the existing network
■
manually by clicking this button.
T :
O ADD A NEW DEVICE
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using
either Push Button Configuration (PBC) method or PIN method.
– 41 –
| Configuring the Router
C 4
HAPTER
31.

Quick Setup