Table of Contents
Advertisement
Some settings of the Router will take effect only after rebooting, which
include
Change of the LAN IP Address (system will reboot automatically).
◆
Change of DHCP Settings.
◆
Change of Wireless configurations.
◆
Change of the Web Management Port.
◆
Upgrade of the Router firmware (system will reboot automatically).
◆
Restore the Router's settings to factory defaults (system will reboot
◆
automatically).
Update the configuration from a file (system will reboot automatically).
◆
Select System Tools->Password from the menu; you can change the
P
ASSWORD
factory default user name and password of the Router in the next screen as
shown in
Figure
Figure 105: Password
It is strongly recommended that you should change the factory default
user name and password of the Router, because all users who try to access
the Router's Web-based utility or Quick Setup will be prompted for the
Router's default user name and password.
The new user name and password must not exceed 14 characters in
N
:
OTE
length and not include any spaces. Enter the new Password twice to
confirm.
Click the Save button when finished.
Click the Clear All button to clear all.
105.
– 112 –
| Configuring the Router
C
4
HAPTER
System Tools
Advertisement
Table of Contents
