Graph Mode - Davis Instruments Vantage Pro2 Plus Manual

Hide thumbs Also See for Vantage Pro2 Plus:
Table of Contents

Advertisement

2. Select the alarm setting you wish to clear.
3. Press 2ND, then press and hold CLEAR until the setting changes to all
dashes.
You have cleared the alarm setting.
4. Press DONE to exit Alarm Mode.
Silencing Alarms
1. Press DONE to silence an alarm when it sounds.
Variable
Barometric Pressure Trend
Evapotranspiration
Humidity, Inside
Humidity, Outside
Dew Point
Leaf Wetness
Rain
Storm
Rain Rate
Soil Moisture
Solar Radiation
Inside Temperature
Outside Temperature
Extra Temperature
Heat Index Temperature
THSW Index Temperature
Wind Chill Temperature
UV Radiation Index
UV Radiation MED
Wind Speed
Time & Date

Graph Mode

The Vantage Pro2 console includes a powerful Graph Mode that allows
you to view over 100 graphs of different kinds right on the screen, all with-
out connecting to a personal computer.
Vantage Pro Station Alarms
Alarms
Storm Warning - uses trend value rising rate
Storm Clearing - uses trend value falling rate
ET Alarm - uses total ET for the day
High and Low
High and Low
High and Low
High and Low
Flash Flood Alarm - uses current 15 minute rainfall total
24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm Alarm - uses current storm rainfall total
High
High and Low
High
High and Low
High and Low
High and Low
High
High
Low
High
High - uses the current total if variable has been reset
High
Yes - the alarm sounds for 1 minute.
Graph Mode
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage pro2Dww6312

Table of Contents