Advertisement
Specifications
Physical Dimensions
Fault Trapper Main Unit
Size: 15.25 x 7.6 x 3.8 cm (6.0 x 3.0 x 1.5 inches)
Weight: 255 grams (9 oz.) with battery
40A In-Line Adapter Module
Size: 11.5 x 7.6 x 5.85 cm (4.5 x 3.0 x 2.3 inches)
Weight: 312 grams (11 oz.)
Input Rating:
Fault Trapper Main Unit: 90 to 265 Volts AC RMS 50/60 Hz,
4 Watts max.
40 Amp In-Line Adapter: 300 Volts AC RMS, 40 Amp circuits
maximum, supplies power to main unit
Measurement Method: Spread Spectrum Time Domain Reflectometry
(SSTDR)
Accuracy: +/-10% of reading
Maximum Length: 300 ft on NM-B or Wire in Conduit
Battery is used to review results when not AC powered
Battery Low Level: Approximately 5.5 volts
Battery Life (9 Volt Alkaline battery, typical)
Standby: 2 years
Active: 4 hours typical
Environmental
Temperature
Operating: 0° to 50°C (32° to 122°F)
Storage temperature: -20° to 60°C (-4° to 140°F)
Long Term Storage w/ battery: 35°C maximum (95°F)
Humidity: 10% to 90%, Non-Condensing
Altitude: 2,000 meters (6,561ft) maximum
Page 19 of 24
Toll Free: 800-749-5783
www.platinumtools.com
Advertisement
