NordicTrack FS10i User Manual page 13

12. Tip: Avoid pinching the wires. Attach the
Console (9) to the Console Bracket (5) with four
M4 x 16mm Screws (143); start all the Screws,
and then tighten them.
13. Tip: Avoid pinching the wires. Attach the
Console Bracket Cover (48) to the Accessory
Tray (111) with two M4 x 16mm Screws (143).
14. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included.
Place a mat beneath the elliptical to protect the floor.
12
143
13
48
143
13
Avoid pinching
9
the wires
5
Avoid pinching
the wires
111