NordicTrack FS10i User Manual page 11

7. Identify a Left Rear Belt Cover (24) and a Right
Rear Belt Cover (25). Attach them to the Left
Pedal Arm (14) with five M4 x 16mm Screws
(143); start all the Screws, and then tighten
them.
Repeat this step on the other side of the
elliptical.
8. See the inset drawing. Identify a Handlebar
Cover (40) and the Right Rear Leg Cover (44),
and slide them onto a Handlebar (16) as shown.
Tip: Avoid pinching the wires. Insert the
Handlebar (16) into the Right Pivot Leg (13), and
attach it with two M10 x 45mm Bolts (119) and
two M10 x 18mm Washers (138).
Tip: Avoid pinching the wires. Press the Right
Rear Leg Cover (44) into the Pivot Covers A and
B (37, 38). Then, press the Handlebar Cover
(40) into place.
Repeat this step on the other side of the
elliptical.
7
143
24
14
25
8
16
16
16
40
44
11
143
Avoid pinching
the wires
119
138
38
40
44
37
13