Table of Contents
Advertisement
If Full Zone is selected, the motion zone grid screen is not displayed. Only set the level of sensitivity for
Motion Sensitivity.
FULL ZONE: The motion sensor is active on the whole screen.
PARTIAL ZONE: The motion sensor is active in the set detection frame.
Select the motion detection position using the mouse or the remote control. Then left click on the mouse or
left click and drag the mouse pointer to select or deselect the area. Highlighted area indicates the partial
motion detection zone. Press the ESC button or right click on the mouse to return to the previous menu.
4-5. Setup – Display Mode
In the Setup menu, select the Display tab. Then, the Display menu is displayed as pictured below. Navigate
through the menu items or change the settings using the mouse or the remote control. To return to the
previous setup menu screen, press the ESC button.
Figure 4.4.4. Motion Zone Grid Screen
Figure 4.5.1. Display Setup Screen
45
Advertisement
Table of Contents
