Front And Rear Panels; Desktop Front Panel - Speco N32NS User Manual

3. Front and Rear Panels

3-1. Desktop Front Panel

Name
POWER
HDD
USB Port
Name
Number1~16
MENU
COPY
ALARM
SEQ
ESC
PLAYBACK
PTZ
MODE
POWER
Figure 3.1.1. Desktop NS Front panel
Table 3.1.1. Front LED and Front Port of NS
LED light is on when power is applied to the system.
LED light is on when the system is recording video data.
This USB port for archiving footage into a USB device. (USB 2.0)
Table 3.1.2. Front Buttons
Select a channel from CH1 to CH16.
[N32NS Channel Button Scenario]
When press number1 to 9 button, it moves to Ch1 to Ch9 screen.
When press number 0 to 9 after pressed number 1, 2 and 3 within 2 seconds,
it moves to Ch10 to Ch32. (For example, press 2 and 1  Ch21)
Buttons from 9 to 16 are used as function keys in PTZ control mode.
To escaping PTZ mode, press the ESC button.
Enters the Setup Menu.
Takes a screenshot on Live and Backup button on Playback.
Activates the external alarm device.
Enable the sequence mode on Live.
Exits the current mode or cancel an operation.
Goes to search menu.
Activate Pan, Tilt and Zoom menu operation.
Select the screen display mode (1x1, 2x2, 3x3, if applicable: 4x4, 1+7)
Initiates system shut down.
LIVE mode – Up
SEARCH mode - Jump 1min ahead on playback and 1 frame ahead on pause.
LIVE mode – Right
SEARCH mode - Control the play speed (Fast Forward).
LIVE mode – Down
SEARCH mode - Jump 1min back on playback and 1 frame back on pause.
Description
Description
23