Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Simrad MO Series
Summary of Contents for Simrad MO Series
- Page 1 MO Series Monitors User Manual ENGLISH simrad-yachting.com...
- Page 3 • Navionics is a registered trademark of Navionics SpA • Simrad is a trademark of Kongsberg Maritime AS Company registered in the US and other countries and is being used under license • B&G, StructureScan, Navico, SonicHub, SimNet, Skimmer, InsightHD, Broadband Radar...
- Page 4 About this manual This manual is a reference guide for installing and operating the Simrad MO Series monitors. The manual does not cover basic background information about how equipment such as radars, echosounders and AIS work. Important text that requires special attention from the reader is emphasized as follows: ¼...
-
Page 5: Table Of Contents
Shortcut functions OSD menu Updating the firmware Checking current firmware version Installing an Update Dimensional drawings Troubleshooting tips Cleaning and maintenance Display removal Replacing the gasket Replacing the filters Other maintenance General specifications Accessories Contents | MO Series User Manual... -
Page 6: Introduction
Introduction The Simrad MO Series monitors offer a low profile, high brightness solution for displaying video from a variety of sources. The range includes six models; the 16”, 19”, and 24” Touch series, and the 16”, 19” , and 24” Pilot series. The Touch models are suited to both indoor and outdoor (direct sunlight) use, whereas the Pilot series are suited to enclosed helm installations. -
Page 7: Display Installation
Fixing options The MO series monitors can be dash or bracket mounted (using optional VESA adaptor). When dash mounting, unit should be fitted using the rear mounted dash mount brackets, and bezel screws from the front. Exclusion of the dash mount bracket will greatly increase strain on bezel screws and adjacent bezel plastics, and is not recommended. -
Page 8: Flush-Mounting The Display
и. ти о и hardwoods - 2.3 - 2.5 mm (3/32”) Drill cutout corners with a small pilot drill bit followed with 13 mm drill bit. Complete cutout with jigsaw or similar tool. Display installation | MO Series User Manual... - Page 9 Fit stopper foot on to end of wing screw. Complete for both threaded holes on each bracket. Fit brackets to rear of display, aligning ‘key holes’ on bracket with screws on back of display case. Display installation | MO Series User Manual...
- Page 10 Once flush with front surface of screen, slide top bezel to the left, and bottom bezel to the right to lock in to place. 10 | Display installation | MO Series User Manual...
-
Page 11: Vesa Mounting The Display
The bracket mounting points on the monitor are only intended to carry the weight of the monitor - do not install the monitor in such a place where it may be used as a handhold, or have additional equipment attached to it. | 11 Display installation | MO Series User Manual... -
Page 12: Connecting The Display
Connecting the display The MO series monitors largely use industry standard cables, which can be purchased pre- terminated in a variety of lengths. The following chapter provides additional details of where cables require field termination by the installer. Rear connections... -
Page 13: Connecting Power
‘false’ touches, or non-registered touches. Recommended fuse rating Model MO16-T MO19-T MO24-T MO16-P MO19-P MO24-P Fuse 3 amp 4 amp 7.5 amp 2 amp 2 amp 4 amp | 13 Connecting the display | MO Series User Manual... -
Page 14: Connecting Touch Control
Connecting touch control The touch screen models of the MO series monitors can provide touch control to the NSO evo2 Marine Processor, as well as Windows 7 and Windows 8 PCs. Connection can be made via serial data for NOS evo2, or USB for PC systems. -
Page 15: Connecting Nmea 2000
Micro-C network drop cable - allows software updating of monitor via NSO evo2 Power cable - NSO evo2 ¼ Note: Peripheral devices in diagram do not necessarily show all required connections where not directly related to MO series monitor. | 15 Connecting the display | MO Series User Manual... -
Page 16: Operating The Display
Adjusts image contrast (range between darkest and lightest ) Shifts colours represented by screen (analogue video only) Saturation Varies colour intensity, from dull to full and rich (analogue video only) 16 | Operating the display | MO Series User Manual... - Page 17 Vertical adjusts vertical position, where 0 = left, and 100 = right Option Sub option Description Language English Select language best suited for OSD text French German Spanish Italian Portuguese | 17 Operating the display | MO Series User Manual...
-
Page 18: Updating The Firmware
USB touch control is automatically enabled upon connection. Updating the firmware Updates to the MO series monitor firmware may occassionally become available. The updates will typically include improvements to exisitng functionality or new features, and will be made available via the Simrad website: www.simrad-yachting.com... -
Page 19: Dimensional Drawings
Dimensional drawings MO16: 383mm MO19: 461mm MO24: 598mm MAX 25.4 mm (1.00") MO16: 400mm MO19: 478mm MO24: 625mm 8 mm (0.31") 66.0 mm (2.60") MAX 88.0 mm (3.46") | 19 Dimensional drawings | MO Series User Manual... -
Page 20: Troubleshooting Tips
Video compromised by interference from other equipment. Vertical shaded bars on incoming video may be in 4:3 ratio, either leave in ‘aspect’ mode, screen image or set to ‘fill’ to use full screen space. 20 | Troubleshooting tips | MO Series User Manual... -
Page 21: Cleaning And Maintenance
The backing paper on outside of gasket will help prevent stretch, and should only be removed when display is ready to install in to dashboard. | 21 Cleaning and maintenance | MO Series User Manual... -
Page 22: Replacing The Filters
The operator should never remove the display unit cover or attempt to service the equipment. Any attempt to do so may make the warranty invalid. 22 | Cleaning and maintenance | MO Series User Manual... -
Page 23: General Specifications
(8-32 bit colour, 25, 29, 30 Hz Interlaced) 1024 x 768 (8-32 bit colour, 60 Hz) ¼ Note: Occassionally specifications may change - refer to the latest edition of the manual on the website: www.simrad-yachting.com | 23 General specifications | MO Series User Manual... -
Page 24: Accessories
000-11248-001 HDMI cable (10m) 000-11249-001 Connector kit (power and serial plugs) 000-11625-001 ¼ Note: Occassionally available accessories may change - refer to the latest edition of the manual on the website: www.simrad-yachting.com 24 | Accessories | MO Series User Manual...
Need help?
Do you have a question about the MO Series and is the answer not in the manual?
Questions and answers