Table of Contents
Advertisement
USER MAINTENANCE INSTRUCTIONS
All service and repair should be performed by qualified vacuum service representative or
electrician. No user serviceable components are employed in the electrical vacuum lid head
assembly. No lubrication of the motor is required.
WARNING
This vacuum may contain potentially hazardous dust depending on its application. Special
handling of contaminated disposable bags and filters is recommended. Disposal must be in
compliance with local EPA regulations.
The use of this machine in conjunction with the pick-up of hazardous materials has not been
investigated by U.L.
CLOTH BAG & HOSE ASSEMBLY
Cloth bag and hose assembly are user maintenance items and can be replaced when worn out.
Cloth bags can be maintained by blowing dust off of the bag and then laundered. Cloth bags
should be completely dryed before re-installing into machine. For optimum performance, empty
and clean filter bag regularly. A clogged and dirty bag restricts the flow of air and results in
reduced vacuum. The hose assembly can be maintained by wiping off with a dampened cloth of
mild liquid soap and water, then allowed to dry.
CORD STORAGE
While not in use storage can be accomplished by winding cord around motor lid assembly. Cord
should be completely unwound from lid assembly during operation.
• Do not use with damaged cord or plug. If appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, return to service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated
surfaces.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
Always unplug the machine
3
Advertisement
Table of Contents
