Table of Contents
Advertisement
See also:
settings" [ 4 21]
▪
"To access the installer
▪
"6.4 Menu structure: Overview installer
6.1.1
To access the most used commands
To access the installer settings
1 Set the user permission level to Installer.
2 Go to [A]:
> Installer settings.
To access the overview settings
1 Set the user permission level to Installer.
2 Go to [A.8]:
> Installer
settings.
To set the user permission level to Installer
Prerequisite: Your user permission level is Adv. end user.
1 Go to [6.4]:
> Information > User permission level.
2 Press
for more than 4 seconds.
Result: Your user permission level is now Installer. The
home pages display
.
INFORMATION
The Installer permission level switches automatically
back to End user in the following cases:
▪ If you press
again for more than 4 seconds, or
▪ If you do NOT press any button for more than 1 hour
To set the user permission level to Advanced end user
1 Go to the main menu or any of its submenus:
2 Press
for more than 4 seconds.
Result: Your user permission level is now Adv. end user. The
user interface displays additional information and a "+" is added to
the menu title. The user permission level stays in Adv. end user
until manually set otherwise.
To set the user permission level to End user
1 Press
for more than 4 seconds.
Result: Your user permission level is now End user. The user
interface displays the default home page.
To modify an overview setting
Example: Modify [1‑01] from 15 to 20.
1 Go to [A.8]:
> Installer
settings.
2 Go to the corresponding screen of the first part of the setting (in
this example [1-01]) by using the
INFORMATION
An additional 0-digit is added to the first part of the setting
when you access the codes in the overview settings.
Example: [1‑01]: "1" will result in "01".
Overview settings
01
00
00
01
15
02
00
04
05
06
08
09
0a
0c
0d
0e
Confirm
Adjust
Scroll
3 Go to the corresponding second part of the setting (in this
example [1-01]) by using the
EJHA04AAV3
Daikin Altherma H Hybrid – Heat pump module
4P530607-1D – 2020.02
settings" [ 4 26]
settings > Overview
.
settings > Overview
and
button.
03
00
07
0b
0f
and
button.
Overview settings
01
00
00
01
15
02
00
04
05
06
08
09
0a
0c
0d
0e
Confirm
Adjust
Scroll
Result: The value to be modified is now highlighted.
4 Modify the value by using the
Overview settings
01
00
00
01
20
02
00
04
05
06
08
09
0a
0c
0d
0e
Adjust
Scroll
Confirm
5 Repeat previous steps if you have to modify other settings.
6 Push
to confirm the modification of the parameter.
7 At installer settings menu, press
Installer settings
The system will restart.
OK
Cancel
Confirm
Adjust
Result: The system will restart.
6.2
Basic configuration
6.2.1
Quick wizard: Language / time and date
#
Code
[A.1]
N/A
Language
[1]
N/A
Time and date
6.2.2
Quick wizard: Standard
Space heating settings
#
Code
[A.2.1.7]
[C-07]
Unit temperature control:
▪ 0 (LWT
decided based on the leaving water
temperature.
▪ 1 (Ext RT control): Unit operation is
decided by the external thermostat.
This is only applicable in case of
*HY2KOMB28+32AA gas boiler.
▪ 2 (RT
decided
temperature of the user interface.
6 Configuration
03
00
07
0b
0f
and
button.
03
00
07
0b
0f
to confirm the settings.
Description
Description
control): Unit operation is
control): Unit operation is
based
on
the
ambient
Installation manual
21
Advertisement
Table of Contents
