Parts List.............................................................................................................................................4
FEATURES ● Designed to hold AV equipment up to 7.5kg (17lbs) ● Glass shelf mount designed to mount glass shelves to 60mm poles, B-Tech trolleys and stands ● Must be used with BT7162, BT7163 or BT7164 CONTENTS Installation Safety Notes........................2 Parts List.............................4...
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions.
Page 3
Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
BT7161 PARTS LIST SHELF BRACKET ASSEMBLY DAMPER PLATE ASSEMBLY Suitable for loads up to 7.5kg (17lbs)
Page 5
PART NAME COLLAR PLATFORM BRACKET DAMPER PLATE FOAM PAD M6 x 8mm SPACER SHELF CLAMP M5 x 20mm SCREW M10 x 10mm HEX GRUB SCREW M8 x 12mm HEX SCREW M8 METAL WASHER M10 x 20mm HEX GRUB SCREW 5mm HEX KEY (FOR PARTS 8 & 9) PLEASE KEEP THIS FOR FUTURE REFERENCE...
INSTALLATION INSTRUCTIONS Slightly loosen parts 9. With foam pad facing up, insert damper assembly (parts 3 and 4) into shelf bracket, until it locates into the back of the shelf bracket. FOAM PAD (PART 4) FACING UP...
Page 7
Insert part 5 into the glass shelf hole, then slide the glass shelf into the gap on the shelf bracket, so the holes are lined up. GLASS SHELF (BT7162/BT7163/BT7164) NOT SUPPLIED Secure in place using part 7. GLASS SHELF...
Page 8
Insert parts 8 into the bottom of platform bracket to secure. DO NOT OVER TIGHTEN. GLASS SHELF Attach shelf bracket to pole. i. Slide the shelf bracket onto the pole. GLASS SHELF 60mm POLE...
Page 9
ii. Fix at desired height by using parts 11. POLE GLASS SHELF Tighten parts 9 to secure the bracket. POLE POLE GLASS SHELF GLASS SHELF...
BT7161 PRODUCT DIMENSIONS 24mm 133mm 5.5mm 61mm 23mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.