Panasonic PT-RW620 Operating Instructions Manual page 91

[VERTICAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
Setting [CORNER CORRECTION]
1) Press as to select [GEOMETRY].
2) Press qw to select [CORNER CORRECTION].
3) Press the <ENTER> button.
f The [GEOMETRY:CORNER CORRECTION] screen is displayed.
4) Press as to select the item to adjust, and press the <ENTER> button.
5) Press asqw to adjust.
[UPPER LEFT]
[LINEARITY]
Horizontal direction
Note
f The menu or logo may run off the screen when [GEOMETRY] is set.
f The edge blending adjustment may not be performed correctly depending on the environment when using the [ADVANCED MENU] menu →
[EDGE BLENDING] and [GEOMETRY] simultaneously.
f The optional Upgrade Kit (Model No.: ET-UK20) can be used to expand the correctable range. To purchase the product, consult your dealer.
(Only for PT-RZ770, PT-RZ660)
f The [GEOMETRY] setting becomes disabled when the [DISPLAY OPTION] menu → [IMAGE ROTATION] is set to anything other than [OFF]
while using PT-RW730 or PT-RW620, disallowing the usage of the geometric adjustment function.
f The settings for [DEFAULT] and [USER] in the [PICTURE] menu → [GAMMA] become disabled when [GEOMETRY] is set to anything other
than [OFF] while using PT-RW730 or PT-RW620. The gamma mode will be the same as when set to [2.2].
f The image may disappear momentarily during adjustment, but this is not a malfunction.
Chapter 4 Settings — [POSITION] menu
[CURVED CORRECTION]
[CORNER CORRECTION]
[UPPER RIGHT]
[HORIZONTAL BALANCE]
[LOWER LEFT]
Vertical direction
[LOWER RIGHT]
ENGLISH - 91