R&S NGL-COM2A Getting Started page 20

®
R&S NGL200/NGM200
5 = Output terminals (one channel with sense for NGL201, NGM201; two channels for NGL202,
NGM202)
6 = USB connector
7 = Power key
Display (1)
The display is a color TFT touch screen. Depending on the instrument model, up
to two channels are shown on the display. The respective measurement settings
and functions are displayed in the individual channel display area. There is a sta-
tus bar in the device level and channel level, showing the device operating mode
and respective channel settings of the instrument.
For a detailed description on-screen layout, see section "Display Overview" in the
User Manual.
Menu control keys (2)
The menu control keys allow you to access the home window, device/channel
menu window and user key in the instrument.
For a detailed description on menu control keys, see section "Menu Controls" in
the User Manual.
Rotary knob and back key (3)
The rotary knob and back key are used for menu navigation and value adjustment
in the instrument.
For a detailed description on rotary knob and back key, see section "Navigation
Controls" in the User Manual.
Output and channel keys (4)
The channel key allows you to select the power supply channel to source or sink
power. The output key allows you to enable or disable the output power on the
channel key.
Refer to datasheet for the channel voltage/current limits in the source and sink
mode.
Output terminals (5)
Depending on the instrument type, one or two output channels are available to
source or sink power.
Getting Started 1178.8720.02 ─ 05
Instrument Tour
Overview of Controls
17