Turning Off The Projector - Sanyo PLC-XU88W Owner's Manual

Turning Off the Projector

1
Press the POWER ON/STAND-BY button on the top
control or on the remote control, and "Power off?"
appears on the screen.

Press the POWER ON/STAND-BY button again to turn
off the projector. The POWER indicator starts to blink
red, and the cooling fans keep running. (You can select
the level of fans' quietness and speed. See "Fan" on
page 55.) At this time, you can unplug the AC power
cord even if the fans are still running.

When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
TO MAINTAIN THE LIFE OF THE LAMP,
ONCE YOU TURN THE PROJECTOR ON,
WAIT AT LEAST FIVE MINUTES BEFORE
TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR
C O N T I N U O U S LY W I T H O U T R E S T.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN
OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24
HOURS.
Notes:
• When the On start function is set to "On," the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.52).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING TEMP. indicator blinks or lights red, see
"WARNING TEMP. indicator" on page 57.
• While the POWER indicator is blinking, the lamp is being
cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.

"Power off?" disappears after 4 seconds.
Basic Operation