Lexmark MS622 User Manual page 67

Understanding the printer menus
Menu item
Domain Search Order
Enable DDNS
Off
On*
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Server Address
Enable BOOTP
Off*
On
Restricted Server List
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Off*
On
Enhanced TLS Security
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Description
Specify a list of domain names to locate the printer and its resources that reside
in different domains on the network.
Note: This menu item appears only in some printer models.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify an IP address for the TCP connections.
Notes:
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
Specify how the IP addresses in the list can access the printer functionality.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
Enhance printer privacy and data integrity.
67