Understanding the printer menus
Menu item
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Download
Flash
All
Font Name
[List of available fonts]
Symbol Set
[List of available symbol set]
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching flash memory or hard disk.
•
Flash/Disk sets the printer to search the flash memory or printer hard
disk for the requested font before searching printer memory.
•
This menu item appears only when a flash memory or printer hard
disk is installed.
Set the printer to wait for additional data before canceling a print job.
Note: When set to On, 40 seconds is the factory default setting.
Description
Specify the source of the fonts that are displayed in the Font Name menu
item.
Note: Make sure that the hard disk and flash option are not
password‑protected.
Choose a font from the specified font source.
Notes:
•
Courier is the factory default setting.
•
The available fonts may vary depending on your printer model.
Specify the symbol set for each font name.
Notes:
•
10U PC‑8 is the U.S. factory default setting. 12U PC‑850 is the
international factory default setting.
•
A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific
text.
•
The available symbol sets may vary depending on your printer model.
55