Lexmark MS622 User Manual page 66

Understanding the printer menus
Menu item
PS SmartSwitch
Off
On*
Job Buffering
Off
On*
Mac Binary PS
Auto*
On
Off
Energy Efficient Ethernet
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
Off
On*
Zero Configuration Name
Enable Auto IP
Off
On*
DNS Server Address
Backup DNS Server Address
Backup DNS Server Address 2
Backup DNS Server Address 3
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to switch automatically to PS emulation when a print job requires
it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Temporarily store jobs on the printer hard disk before printing.
Notes:
•
This menu item appears only when a hard disk is installed.
•
This menu item appears only in some printer models.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Reduce power consumption when the printer does not receive data from the
Ethernet network.
Description
Set the current TCP/IP host name.
Set the domain name.
Note: This menu item appears only in some printer models.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Note: This menu item appears only in some printer models.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
66