Lift Cylinder (Three Stage Mast Free Lift); 9-4.1. Removal - Big Joe CB33 Manual

9-4. Lift Cylinder (Three Stage Mast Free Lift)

9-4.1. Removal

1. Fully lower the lift carriage.
2. Turn off the key switch and disconnect the batteries.
WARNING: Before attempting any replacement, make certain
power is disconnected.
Without Side Shift
DP_0020
9-6
3.
4.
5.
DP_0038
Figure 9-5 Lift System (Three Stage Mast)
Using another lift truck or suitable jack, raise lift carriage far
enough to remove pressure on the free lift cylinder
Remove cotter pin and clevis pin connecting the lift chain to
the anchor at cylinder.
Remove screw, lock washer, flat washer, bracket and ram
head (8) from cylinder.
With Side Shift
BL-CB33-0115 - 03-01-2018