Big Joe CB33 Manual page 23

4-1.5.1. Set Options
To set options proceed as follows:
1. Connect the Zapi Handset, refer to paragraph
4-1.2.
2. Press the ROLL up button and the SET up button
at the same time to enter the CONFIG MENU.
3. Press the ROLL down button or the ROLL up but-
ton to find the SET OPTIONS display.
4. Press the ENTER button to view the options.
5. Press the ROLL down or the ROLL up button to
find the option to be changed.
6. Press the SET up button or the SET down button
until the desired value setting is reached. The
option is now set at the desired value.
7. Press the OUT button to exit the options.
4-1.5.2. Adjustments
To change an adjustment proceed as follows:
1. Connect the Zapi Handset, refer to paragraph
4-1.2.
2. Press the ROLL up button and the SET up button
at the same time to enter the CONFIG MENU.
3. Press the ROLL down button or the ROLL up but-
ton to find the ADJUSTMENTS display.
BL-CB33-0115 - 03-01-2018
4. Press the ENTER button to view the adjustments.
5. Press the ROLL down button or the ROLL up but-
ton to find the adjustment to be changed.
6. Press the SET up button or the SET down button
until the desired value setting is reached. The
adjustment is now set at the desired value.
7. Press the OUT button to exit the adjustments.
4-1.5.3. Parameter Change
To change a parameter proceed as follows:
1. Connect the Zapi Handset, refer to paragraph
4-1.2.
2. Press the ROLL down button and the ENTER but-
ton at the same time to enter the MAIN MENU.
3. Press the ROLL down button or the ROLL up but-
ton to find the PARAMETER CHANGE display.
4. Press the ENTER button to view the parameters.
5. Press the ROLL down button or the ROLL up but-
ton to find the parameter to be changed.
6. Press the SET up button or the SET down button
until the desired value setting is reached. The
parameter is now set at the desired value.
7. Press the OUT button to exit the parameters.
4-5