Hach TL2360 Basic User Manual page 9

User interface and navigation
The instrument display is a touch screen. Only use a clean, dry finger tip to navigate the functions of
the touch screen. Do not use writing tips of pens or pencils or other sharp objects to make selections
on the screen or damage to the screen will occur.
Refer to Figure 3 for an overview of the home screen.
Figure 3 Display overview
1 Sample ID and measurement number
2 User comments
3 Instructions
4 Turbidity value, unit and reading mode
5 Warning or error message
6 Calibration status icon and calibration curve
Icon Description
Logs in or logs out an operator. To log in, select an operator ID and then push Login. To log out,
push Logout.
Note: When an operator is logged in, the Login icon changes to the icon selected for the operator ID (e.g., fish,
Login
butterfly or soccer ball) and the text "Login" changes to the operator ID.
Selects the sample ID.
Sample ID
Starts a calibration.
Calibration
5
The measurement number increases by one each time a measurement is completed.
5
7 UP/DOWN navigation arrows
8 Sidebar menu (refer to
9 Time and date
10 Options button
11 Read button
12 Home/Instrument information button
Table 1 Sidebar menu icons
Table 1)
English 9