Advertisement
Quick Links
Description
Channels
Accelerometer Type
Acceleration Range
Acceleration Resolution
Calibrated Accuracy
Frequency Response
Sample Rate
Reading Rate
Memory
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
-20 °C to +60 °C, 0 %RH to 95 %RH (non-condensing)
Material
Dimensions
3.5 in x 4.4 in x 1.0 in (89 mm x 112 mm x 26 mm)
Weight
Approvals
*Shock101 Acceleration Range, Resolution and Accuracy
Range (g)
+5
Accuracy (g)
+0.2
Resolution (g)
0.01
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 60 °C (140 °F).
1.800.561.8187
Shock101
Shock (3 axes)
MEMS Semiconductor
*See Table Below
0 Hz to approx. 400 Hz
512 Hz
64 Hz to 5 minutes
349,525/axis
IFC200
115,200
7 days
Anodized aluminum
12 oz (340 g)
CE
+50
+100
+250
+1
+2
+4
0.05
0.1
0.2
DOC-1061035-00 REV 10 2014.02.14
www.
Product User Guide
Shock101-5
Tri-axial +5g, Shock Data Logger
Shock101-50
Tri-axial +50g, Shock Data Logger
Shock101-100
Tri-axial +100g, Shock Data Logger
Shock101-250
Tri-axial +250g, Shock Data Logger
information@itm.com
.com
Shock101
Advertisement
Related Manuals for MadgeTech Shock101
Summary of Contents for MadgeTech Shock101
- Page 1 Anodized aluminum Dimensions 3.5 in x 4.4 in x 1.0 in (89 mm x 112 mm x 26 mm) Weight 12 oz (340 g) Approvals *Shock101 Acceleration Range, Resolution and Accuracy Shock101-5 Range (g) +100 +250 Tri-axial +5g, Shock Data Logger Accuracy (g) +0.2...
- Page 2 Installing the Interface cable Recalibration - IFC200 The Shock101 standard calibration is performed at 0 g on the x-axis, 0 g on the y-axis and Insert the device into a USB port. The drivers will install automatically. 1 g on the z-axis.