Subscribe to Our Youtube Channel
Related Manuals for Lumberjack LJ305SCMS-DB
Summary of Contents for Lumberjack LJ305SCMS-DB
- Page 1 SAFETY AND OPERATING MANUAL 305MM DOUBLE BEVEL SLIDE COMPOUND MITRE LJ305SCMS-DB ORIGINAL INSTRUCTIONS LJ305SCMS-DB...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Welcome to Lumberjack! Dear customer, Congratulations on your purchase. Before using the Product for the first time please be sure to read these instructions for use. They provide you with all information necessary for using the product safely and to ensure its long service life. -
Page 3: General Power Tool Safety Warnings
A wrench or a key left c) Do not expose power tools to rain or wet attached to a rotating part of the power tool may conditions. Water entering a power tool will result in personal injury. increase the risk of electric shock. LJ305SCMS-DB... - Page 4 Use power tools only with specifically operate the power tool. Power tools are designated battery packs. Use of any other dangerous in the hands of untrained users. battery packs may create a risk of injury or fire. LJ305SCMS-DB...
- Page 5 8.2 Make sure that the guard operates properly complete stop. Correct the cause for the jamming and that it can move freely. Never lock the of the saw blade before restarting the machine. guard in place when opened. LJ305SCMS-DB...
- Page 6 (such as wood or a rough‐coated held more secure than by hand. surface) that does not have a reflective Surface 8.19 Never leave the machine before it has come to a complete stop. Cutting tools that are still running can cause injuries. LJ305SCMS-DB...
- Page 7 10.5. When using a cable reel, always unwind the carried out by the laser manufacturer or an authorized service agent. cable completely. 9.12 Do not attempt to repair the laser guide by yourself. 9.13 Do not attempt to change any parts of the laser guide. LJ305SCMS-DB...
- Page 8 Caution: Laser radiation. Do Caution! Wear a dust mask. not look into the beam! Laser class 2 product! Amperes 7.5M 0 – 2.0 2.1 – 3.4 3.5 - 5.0 5.1 – 7.1 7.1 – 12.0 12.1 – 20.0 LJ305SCMS-DB LJ305SCMS-DB...
-
Page 9: Machine Details And Product Features
Nett Weight: 23kg sawing hardwood and softwood. The power tool is not suitable for cutting Sound Pressure Level: LpA 101dB aluminium or other non‐ferrous metals or Sound Power Level: LWA 114dB alloys LJ305SCMS-DB LJ305SCMS-DB... -
Page 10: Assembly
For efficient operation, obtained, use the mitre lock handle to lock the empty the dust bag when it is no more than half table. full. This allows better air flow through the bag. LJ305SCMS-DB... - Page 11 - The edge of the square and the saw blade should screw and locked in position with the lock nut. be parallel. - If the saw blade angles away from the square adjust as follows; LJ305SCMS-DB...
- Page 12 - If the fence angles away from the square, adjust as follows; - Remove the fence extension by sliding them off the fence. Loosen the fence cap screws on both sides and position the fence against the square and retighten all cap screws. - Reinstall fence extensions. LJ305SCMS-DB...
-
Page 13: Operation
-Retighten the mitre lock handle. before removing the workpiece. WARNING: Be sure to tighten the mitre lock handle before making a cut. Failure to do so could result in the table moving during the cut and cause serious personal injury. LJ305SCMS-DB... - Page 14 If the concave side is placed against the - Hold the handle firmly and squeeze the fence, the board should break and jam the trigger. Allow the blade to reach blade. maximum speed. LJ305SCMS-DB...
- Page 15 -Reposition the lower blade guard and guard Do not use the saw to cut metal or plate and secure the guard plate with both pan masonry head screws removed in step 4. LJ305SCMS-DB...
- Page 16 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by your nearest authorized service center. NOTE: All the ball bearings are sealed and lubricated for life and will require no maintenance. LJ305SCMS-DB...
- Page 17 Keep tools sharp and clean for best and safest KEEP WORK AREA CLEAN. performance. Follow instructions for lubricating Cluttered areas and benches invite accidents. and changing accessories. Make sure the floor is clean and not slippery due to wax and sawdust build-up. LJ305SCMS-DB...
- Page 18 NEVER LEAVE MACHINE RUNNING ALLOW the motor to come up to full speed UNATTENDED. Turn power "OFF". Don't leave before starting cut. any tool running until it comes to a complete stop. KEEP motor air slots clean and free of chips. LJ305SCMS-DB...
-
Page 19: Maintenance And Service
- DISCONNECT saw from power source before leaving it. - MAKE SURE blade is not contacting - MAKE SURE the work area is clear. workpiece before switch is turned on. - NEVER lock the switch in the "ON" position. LJ305SCMS-DB... -
Page 20: Lumberjack Guarantee
1.2.7 The product has not been used for 1.2.3 If asked to do so by lumberjack or hire purposes. its Authorised Dealer, you return the product at your own cost to 1.2.8 The product has been purchased by... - Page 21 2.4 Please note that it is essential that the letter of 2. Claims Procedure claim reaches Lumberjack on the last day of this 2.1 In the first instance please contact the guarantee at the latest. Late claims will not be Authorised Dealer who supplied the product to considered.
- Page 22 DECLORATION OF CONFORMITY MISSING LJ305SCMS-DB...
-
Page 23: Parts List
Bearing Upper handle Fixed guard Binding post Dust pipe run Switch Sunk Screw Lower handle Depth of cut adjust Plate guarding(Big) knob Socket head screw Plate Guarding (Small) Moving guard plate Knurled thin nut Big washer Motor support Screw LJ305SCMS-DB... - Page 24 Knob(Long) Lock pin cap Safety foot Bearing cover Lock boot Laser fixed plate Split pins Screw Lock bolt Dual laser carrier Support bar Screw Lock handle Laser Screw Screw Lock handle cap Laser case Base Laser window Rubber foot LJ305SCMS-DB...
- Page 25 Workpiece knob Capacitor Support pole Screw Socket head screw Washer Knob(Short) Shield lock piece Knob(Long) Shield lock sheet Right attach fence Spring Socket head screw Washer Slide stopper Locknut Lock handle cap Washer Screw Spring washer Lock handle Screw LJ305SCMS-DB...
- Page 26 PARTS DIAGRAM PART 1 LJ305SCMS-DB...
- Page 27 PARTS DIAGRAM PART 2 LJ305SCMS-DB...
-
Page 28: Parts Diagram
PARTS DIAGRAM FULL LJ305SCMS-DB...
Need help?
Do you have a question about the LJ305SCMS-DB and is the answer not in the manual?
Questions and answers