Onboard Fdc Controller - Gigabyte GA-6CX7 User Manual

6CX7 Series Motherboard

OnBoard FDC Controller

Auto
Disabled
Enabled
OnBoard Serial Port A
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
OnBoard Serial Port B
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port B Mode
(This item allows you to determine which Serial Port B Mode of onboard I/O chip)
Normal
IrDA (1.6 S)
IrDA (3/16)
ASKIR
IR Duplex Mode
N/A
Half Duplex
Full Duplex
Set OnBoard FDC Controller is Auto. (Default Value)
Disabled OnBoard FDC Controller.
Enabled OnBoard FDC Controller.
BIOS will automatically setup the port A address. (Default Value)
Enable OnBoard Serial port A and address is 3F8.
Enable OnBoard Serial port A and address is 2F8.
Enable OnBoard Serial port A and address is 3E8.
Enable OnBoard Serial port A and address is 2E8.
Disable OnBoard Serial port A.
BIOS will automatically setup the port B address. (Default Value)
Enable OnBoard Serial port B and address is 3F8.
Enable OnBoard Serial port B and address is 2F8.
Enable OnBoard Serial port B and address is 3E8.
Enable OnBoard Serial port B and address is 2E8.
Disable OnBoard Serial port B.
Set onboard I/O chip Serial Port B to Normal Mode. (Default Value)
Set onboard I/O chip Serial Port B to IrDA (1.6 S Baud Rate)mode.
Set onboard I/O chip Serial Port B to IrDA (3/16) Mode.
Set onboard I/O chip Serial Port B to ASKIR Mode.
Disabled this function. (Default Value)
IR Function Duplex Half.
IR Function Duplex Full.
73