4. System Installation Procedures
Warning: Please remove the protective thin films (Top and Bottom)
from the system when installing.
4.1. Chassis Cover Removal
Step 1. Unscrew the two thumbscrews from the back of the system
(Fig-1).
Step 2. Standing at the front of the system. Gently apply force to the
indentures with your thumbs and push toward the rear of the chassis for
about 3/4 of an inch. Top cover may be lifted straight up (Fig-2).
Figure 1
Step 3. After removing the top cover, you will see a plastic air duct over
the CPU and Memory. Remove the air duct to install the CPU and
Memory (Fig-3).
GS-SR103 System Installation Guide
Figure 3
Figure 2
4-1