Table of Contents
Advertisement
GS-SR113 System Installation Guide
5. System Installation Procedures
Please remove the protective thin films (Top and bottom)
from the system when installing.
5.1. Chassis Removal
Step 1. Unscrew the two thumbscrews from the back of the
system. (Fig-1)
Figure 1
Step 2. Standing at the front of the system. Gently apply force to
the indentures with your thumbs and push toward the rear of the
chassis for about 3/4 of an inch. Top cover may be lifted straight
up. (Fig-2)
Step 3. After removing the top cover, you will see a plastic airflow
duct over the CPU and Memory. Rise up the airflow duct. (Fig-3)
Step 4. Install CPU and other essential components.
Figure 2
11
Advertisement
Table of Contents
