Table of Contents
Advertisement
GS-SR103 System Installation Guide
Figure 10
Step 3. Install the card into place. Secure the card with screw. Make
sure it is seated properly into PCI slot. (Fig-11)
Step 4. Replace the raiser bracket into the PCI slot on the
motherboard (Fig-12).
Figure 12
Step 5. The card is seated properly into PCI slot. (Fig-13)
4.6. Airflow Duct Installation
GS-SR103 is installed a new device which called Airflow Duct. The
main function of Airflow duct is the capability of driving out excessive
system heat (Especially the CPU Heat). In order to maintain the system
operation smoothly, please note that CPU and RAM have been installed.
Remember to apply the airflow duct back onto the system to ensure the
consistency of system operation. To install the airflow duct properly,
please take the following steps:
4-4
Figure 11
Figure 13
Advertisement
Table of Contents
