Table of Contents
Advertisement
1. Safety, Care and Regulatory Information
Important safety information
Read and follow all instructions marked on the product and in the
documentation before you operate your system. Retain all safety and
operating instructions for future use.
The product should be operated only from the type of power source
indicated on the rating label.
If your computer has a voltage selector switch, make sure that the
switch is in the proper position for your area. The voltage selector
switch is set at the factory to the correct voltage.
The plug-socket combination must be accessible at all times because
it serves as the main disconnecting device.
All product shipped with a three-wire electrical grounding-type plug
only fits into a grounding-type power outlet. This is a safety feature.
The equipment grounding should be in accordance with local and
national electrical codes. The equipment operates safely when it is
used in accordance with its marked electrical ratings and product
usage instructions
Do not use this product near water or a heat source.
Set up the product on a stable work surface or so as to ensure
stability of the system.
Openings in the case are provided for ventilation. Do not block or
cover these openings. Make sure you provide adequate space
around the system for ventilation when you set up your work area.
Never insert objects of any kind into the ventilation openings.
To avoid electrical shock, always unplug all power cables and modem
cables from the wall outlets before removing covers.
Allow the product to cool before removing covers or touching internal
components.
Precautions for Products With Laser Devices
Observe the following precautions for laser devices:
Do not open the CD-ROM drive, make adjustments, or perform
procedures on a laser device other than those specified in the
product's documentation.
GS-SR103 System Installation Guide
1-1
Advertisement
Table of Contents
